ENC-MA9120 9.6V 1.5Ah / 2Ah Ni-CD Power Tool Replacement Battery 9120 for Makita 6014DW / 6200D / 6201D / 6202D / T422D / DA392D Drills Angle Drills and Job Site Lights

The ENC-MA9120 replacement battery is fully compatible with the following Makita 9120 power tool, flashlight and job site radio models:

✅ 1.5Ah / 2Ah Dual-Capacity Ni-CD for the Makita 9.6V Fleet
Direct replacement for the Makita OEM battery 9120, purpose-built to cover 24 tools in a single SKU - the 6000 series driver-drill fleet (6014DW / 6200D / 6201D / 6201DWH / 6202D / 6221D), the T-series drills (T1022D / T221D / T422D and variants), the DA392 angle drill family and the BMR100 job site radio with the ML901 / ML903 flashlights. Choose 1.5Ah 14.4Wh for the lightest rotation or 2Ah 19.2Wh for roughly 33% more runtime per charge - same housing, same weight class, fully interchangeable.

✅ Proven Ni-CD Durability, Cold-Weather Reliable
Premium high quality long-cycle Ni-CD cells deliver stable 9.6V output with the sustained high-current discharge that drilling, driving and fastening demand. Ni-CD chemistry tolerates deep discharge cycles, charges reliably in cold jobsite conditions down to around -10 degrees C, and shrugs off drops, vibration and hard handling. Its memory effect is fully manageable - periodic full-discharge refresh cycles keep the pack at rated capacity for years.

✅ Faithful OEM-Spec Fit, Rugged Red Housing
The 8.8*7.8*10.3 cm housing faithfully follows the original battery dimensions and latch geometry for a true plug-and-play fit - slide the pack on, hear the latch click, and the tool is ready to work. The red high impact ABS/PC composite shell is anti-drop, dustproof and moisture resistant, and every pack passes 100% aging testing before shipment with a 12-month full quality warranty.

• ⭐ Makita 9120 Replacement - Matches the original battery family for a drop-in fit across all 24 listed models without modification
• ⭐ 1.5Ah / 2Ah Dual Capacity - Two capacity options on one platform: 14.4Wh standard rotation or 19.2Wh extended runtime per charge
• ⭐ High-Drain Cell Design - Sustained high-current delivery for demanding applications with no significant power sag under load
• ⭐ 24 Tools, One SKU - Covers drills, angle drills, flashlights and the job site radio with a single battery standard
• ⭐ Rugged Jobsite Housing & Warranty - Red high impact ABS/PC shell, 100% aging tested before shipment, OEM private label available, 12-month full quality warranty

• ⚠ Do not disassemble, puncture, crush or modify the battery housing - internal cell damage may cause alkaline electrolyte leakage, overheating or fire. If electrolyte contacts skin or eyes, flush immediately with plenty of clean water and seek medical attention. Stop using the battery immediately if you notice unusual heat, odor, swelling or deformation, and move it to a safe non-flammable area away from combustibles.

• ⚠ Keep battery terminals away from metal objects such as screws, nails, coins and keys to prevent accidental short-circuit - a particular risk in tool boxes and on jobsites. Do not expose the battery to high temperature, direct sunlight or open flame for extended periods.

• ⚠ Only charge with a Ni-CD compatible charger designed for the Makita 9120 battery family. Do NOT use a Li-ion charger with CC/CV logic on this Ni-CD battery - the charging logic is completely different and may cause under-charge, overheating or permanent damage. Many Makita Ni-MH chargers also support Ni-CD, but always confirm your charger label explicitly lists Ni-CD before use.

• ⚠ To manage memory effect, run the pack through a full discharge every 10-15 cycles before recharging. Let the pack cool down after heavy use, and charge in a dry area at room temperature. For long-term storage, keep the pack in a cool dry place and check it every 2-3 months. This battery contains cadmium - dispose of spent packs ONLY at an authorized battery recycling collection point in compliance with local regulations; never put them in household waste.