ENC-MA1220 12V 1.5Ah / 2Ah Ni-CD Power Tool Replacement Battery 1220 / PA12 for Makita 1050D / 1050DA / 4013D / 4331D / 6316D / 6918D / 8413D Drills Drivers Saws and Job Site Lights

The ENC-MA1220 replacement battery is fully compatible with the following Makita 1220 / PA12 power tool and job site light models:

✅ 1.5Ah / 2Ah Capacity Options for the Makita 12V Fleet
Direct replacement for the Makita OEM battery 1220 / PA12, purpose-built to cover 114 tools in a single housing - the 1050D / 4013D / 4191D / 4331D / 5093D saw and multitool lines, the 6213 / 6217 / 6223 / 6227 / 6270 and 6313 / 6316 / 6317 / 6319 driver-drill fleets, the 6835 screwdriver series, the 6914 / 6916 / 6917 / 6918 / 6980FD impact drivers and wrenches, the 8270 / 8413 / 8414 hammer drills, the DA312D angle drills and the ML120-124 / UB120 / UC120-170 / VR250-251 job site lights and outdoor tools. Choose 1.5Ah (18Wh) for cost-efficient everyday rotation or 2Ah (24Wh) for longer runtime on demanding shifts.

✅ Rugged Ni-CD Chemistry Built for Hard Jobsite Service
Premium high quality long-cycle Ni-CD cells deliver stable 12V output with the sustained high-current discharge that drilling, driving and sawing demand. Nickel-Cadmium is exceptionally tolerant of deep discharge cycles and hard daily charge-and-go handling, keeps its output dependable in cold weather conditions, and offers a long cycle life - with any memory effect easily managed through an occasional full discharge before recharging.

✅ Faithful OEM-Spec Fit, Rugged Red Housing
The 13.0*9.0*10.0 cm housing faithfully follows the original battery dimensions and latch geometry for a true plug-and-play fit - slide the pack on, hear the latch click, and the tool is ready to work. The red high impact ABS/PC composite shell is anti-drop, dustproof and moisture resistant, and every pack passes 100% aging testing before shipment with a 12-month full quality warranty.

• ⭐ Makita 1220 / PA12 Replacement - Matches the original battery family for a drop-in fit across all 114 listed models without modification
• ⭐ Two Capacity Tiers - 1.5Ah (18Wh) and 2Ah (24Wh) options share the same housing, so mixed fleets can standardize on one battery form factor
• ⭐ High-Drain Ni-CD Cell Design - Sustained high-current delivery for demanding applications with no significant power sag under load
• ⭐ Cold Weather & Deep Discharge Tough - Ni-CD chemistry keeps working where lesser cells fade: low temperatures, deep cycles and rough jobsite handling
• ⭐ Rugged Jobsite Housing & Warranty - Red high impact ABS/PC shell, 100% aging tested before shipment, OEM private label available, 12-month full quality warranty

• ⚠ Do not disassemble, puncture, crush or modify the battery housing - internal cell damage may cause alkaline electrolyte leakage, overheating or fire. If electrolyte contact occurs, flush the affected area with clean water immediately and seek medical attention. Stop using the battery right away if you notice unusual heat, odor or deformation, and move it to a safe non-flammable area away from combustibles.

• ⚠ Keep battery terminals away from metal objects such as screws, nails, coins and keys to prevent accidental short-circuit - a particular risk in tool boxes and on jobsites. Do not expose the battery to high temperature, direct sunlight or open flame for extended periods.

• ⚠ Only charge with a Ni-CD compatible charger designed for the Makita 1220 / PA12 battery family. Do NOT use a Li-ion charger with CC/CV logic on this Ni-CD battery - the charging logic is completely different and may cause under-charge, overheating or permanent damage. Chargers designed only for Ni-MH packs should also be avoided unless they explicitly support Ni-CD - always check the charger label before use.

• ⚠ To avoid memory effect, let the pack run down fully before recharging every few cycles instead of topping it up from partial discharge. Let the pack cool down after heavy use before recharging, and store it in a cool dry place. This battery contains cadmium: spent packs MUST be returned to an authorized battery recycling collection point in compliance with local regulations - never dispose of them in household waste.