ENC-FNB12 12V 600mAh Ni-CD Two-way Radio Battery FNB-12 for Vertex Standard FTH-2005 FTH-7005 FTH-2008 FTH-7008 Walkie Talkie | Enpower
ENC-FNB12 12V 600mAh Ni-CD Rechargeable Battery for Vertex Standard FTH-2005 / FTH-7005 / FTH-2008 / FTH-7008 Two-way Radio
Enpower ENC-FNB12 rugged nickel-cadmium rechargeable battery engineered as a faithful OEM-spec replacement power supply for Vertex Standard OEM battery FNB-12. Purpose-built for the FTH-2005 / FTH-7005 / FTH-2008 / FTH-7008 professional handheld radios, this pack runs on a higher 12V nominal platform (10-cell configuration) that delivers maximum transmit power headroom, stronger signal penetration and crisp audio output for demanding fleet communication in construction, security, warehousing, manufacturing, logistics, property management and event operations. Built around premium high quality long-cycle Ni-CD cells with stable 12V nominal voltage and a dependable 600mAh capacity, a high impact ABS/PC composite shell and brass golden plated low-resistance contacts. The 8.19*5.50*3.24cm form factor faithfully follows the original battery dimensions, preserving the radio's balance and on-person carry comfort. Ni-CD chemistry is proven for fast charging, deep-discharge tolerance and reliable -20 degrees C cold-weather operation, with the lowest cost per cycle for high-volume rotation pools. Integrated protection covers short-circuit, over-temperature, charging temperature sensing and reverse polarity, and the pack works with your existing Ni-CD chargers (negative delta-V logic) with zero new charging infrastructure. Manufactured in Guangdong China with 12-month full quality warranty.
Basic Product Information
Applicable Equipment
Two-way Radio / Walkie Talkie
Matching OEM Models
FNB-12
Battery Type
Ni-CD (Nickel-Cadmium)
Overall Size (H*W*D)
8.19*5.50*3.24 cm
Shell Material
High Impact ABS/PC
Contact Material
Brass Golden Plated
Cell Quality
High Quality Long Cycle Ni-CD Cells
Protective Function
Short-Circuit Protection + Over-Temperature Protection + Charging Temperature Sensor + Reverse Polarity Protection
Application
Consumer Electronics / Two-way Radio
Quality Control
100% Aging Testing
Place of Origin
Guangdong, China
Warranty Period
12 Months
Compatible Radio Models
The ENC-FNB12 replacement battery is fully compatible with the following Vertex Standard two-way radio models:
FTH-2005
FTH-7005
FTH-2008
FTH-7008
Product Description & Core Advantages
✅ 12V High-Platform Power for FTH-2005 / FTH-7005 / FTH-2008 / FTH-7008
Direct replacement for Vertex Standard OEM battery FNB-12, purpose-built for the FTH-2005 / FTH-7005 / FTH-2008 / FTH-7008 professional handhelds. The 12V ten-cell platform gives these radios maximum transmit headroom, stronger signal penetration and crisper audio than the common 7.2V packs — while the 8.19*5.50*3.24cm housing faithfully follows the original battery dimensions for a plug-and-play fit, no modification required. Keep your FTH fleet running on one single battery standard for unified procurement and management.
✅ Rugged Ni-CD Economy Workhorse
Premium high quality long-cycle Ni-CD cells deliver stable 12V output and a dependable 600mAh capacity — enough for 3-5 hours of operation under standard duty cycles. Ni-CD chemistry is proven for fast charging, deep-discharge tolerance and reliable -20 degrees C cold-weather operation, with the lowest cost per cycle — the economical choice for high-volume spare-battery rotation pools in harsh jobsite conditions.
✅ Full Protection Suite & Zero Charger Investment
Integrated protection covers short-circuit, over-temperature, charging temperature sensing and reverse polarity — complete safety for daily operations. Robust high-impact ABS/PC composite housing and brass golden plated low-resistance contacts — anti-drop, dustproof and moisture resistant. Works with your existing Vertex Standard Ni-CD chargers (negative delta-V logic) — no new charging infrastructure required.
- ⭐ OEM FNB-12 Replacement — Faithfully matches original dimensions (8.19*5.50*3.24cm), drop-in fit for FTH-2005 / FTH-7005 / FTH-2008 / FTH-7008 without modification
- ⭐ 12V Ten-Cell Platform — Highest nominal voltage in the Vertex handheld lineup delivers maximum transmit power headroom, stronger penetration and crisp audio output
- ⭐ -20 degrees C Cold-Weather Proven — Ni-CD chemistry keeps delivering in freezing warehouses, winter construction sites and outdoor emergency response
- ⭐ Fast Charge & Deep-Discharge Tolerance — Handles rapid charging cycles and accidental deep discharge, with refresh cycles restoring full performance
- ⭐ Industrial Craftsmanship & Warranty — Brass golden plated contacts, 100% aging tested before shipment, OEM private label available, 12-month full quality warranty
Related Two-way Radio Batteries
Safety Cautions
⚠ Do not disassemble, puncture, crush or modify the battery housing — internal cell damage may cause electrolyte leakage, overheating or fire. Stop using the battery immediately if you notice unusual heat, odor or deformation, and move it to a safe non-flammable area away from combustibles.
⚠ Keep battery terminals away from metal objects such as coins, keys and jewelry to prevent accidental short-circuit. Do not expose the battery to high temperature above 60 degrees C, direct sunlight or open flame for extended periods.
⚠ Only charge with a Ni-CD compatible charger using negative delta-V charging logic — including your existing Vertex Standard charger for FNB-12-type packs. Do NOT use a Li-ion CC/CV charger on this Ni-CD battery — the charging logic is completely different and may cause over-charge, overheating or permanent damage.
⚠ This pack contains cadmium. Dispose of spent packs at an authorized battery recycling collection point in compliance with local regulations — do not put them in household waste. For long-term storage, keep the pack in a cool dry place and recharge it every 2-3 months to prevent deep self-discharge.
Frequently Asked Questions
Q1: Is ENC-FNB12 fully compatible with OEM FNB-12 and my FTH-2005 / FTH-7005 / FTH-2008 / FTH-7008 radios?-
A: Yes. ENC-FNB12 is a faithful OEM replacement for Vertex Standard FNB-12, with identical 8.19*5.50*3.24cm housing dimensions and a plug-and-play fit for the FTH-2005 / FTH-7005 / FTH-2008 / FTH-7008 handhelds. No modification required, and your existing Ni-CD charger keeps working.
Q2: What is the difference between ENC-FNB12 (Ni-CD 600mAh) and ENH-FNB12 (Ni-MH 1100mAh) for the same FNB-12 platform?+
A: Both packs share the same 12V ten-cell FNB-12 housing and work on the same negative delta-V charging logic, but they serve different priorities. ENC-FNB12 (Ni-CD, 600mAh, 3-5h) is the rugged economy workhorse: proven -20 degrees C cold-weather performance, fast-charge and deep-discharge tolerance, and the lowest cost per cycle — ideal for large rotation pools. ENH-FNB12 (Ni-MH, 1100mAh, 7-9h) offers nearly double the runtime with cadmium-free, memory-free chemistry — ideal when longer shifts matter more than unit cost. Choose by chemistry requirement and budget; both fit the FTH-2005 / FTH-7005 / FTH-2008 / FTH-7008 as well as the FTH-2009 / FTH-2010 / FTH-7010 / FTH-2070 radio lines.
Q3: Does this Ni-CD battery have a memory effect? How should I maintain it?+
A: Ni-CD chemistry can develop a memory effect if it is repeatedly recharged after only partial discharge. We recommend performing a full discharge-charge refresh cycle every 20-30 charge cycles to restore full capacity. Occasional deep discharge is actually beneficial for Ni-CD packs — unlike Li-ion chemistry. Avoid overcharging beyond the charger's automatic cutoff, and the pack will deliver thousands of reliable cycles.
Q4: Will ENC-FNB12 also fit FTH-2009, VX-10, VX-5R, VX-350, Motorola, ICOM or other radio models?+
A: No. ENC-FNB12 (replacement for OEM FNB-12, Ni-CD chemistry) is intended for the FTH-2005 / FTH-7005 / FTH-2008 / FTH-7008 radios listed above. Other Vertex Standard radios use different battery families: the FTH-2009 / FTH-2010 / FTH-7010 / FTH-2070 line pairs with the Ni-MH version ENH-FNB12, the VX-110 through VX-246 / VX-400-428 broad family uses FNB-V57 (Ni-CD), FNB-V83 (Ni-MH) or FNB-V67 (Li-ion), the VX-10V / VX-10U series uses FNB-41 (9.6V), the VX-5R / VX-6R / VX-7R series uses FNB-V80LI, the VX-350 / VX-351 / VX-354 series uses FNB-V95LI, the VX-230 / VX-231 / VX-228 series uses FNB-V104LI (Li-ion) or FNB-V106 (Ni-MH), the VX-450 series uses FNB-V113LI, the EVX-530 DMR series uses FNB-V134LI, and the VX-260 series uses FNB-V131 — housing dimensions, voltage platform, contact arrangement and locking mechanism are NOT interchangeable across these families. The same applies across brands: Motorola radios use their own NTN/NNTN/PMNN/HNN families, ICOM radios use the BP- series, KENWOOD radios use the KNB- series, and Hytera radios use the BH/BL series — Vertex/Yaesu packs do not fit Motorola, ICOM, KENWOOD or Hytera radios and vice versa. Always check the OEM battery part number printed on your existing battery before ordering.
Q5: Do you support OEM custom labeling or bulk quantity orders?+
A: Yes, we accept OEM and ODM orders. Custom shell printing, private label, capacity variants and connector customization are all available for bulk quantity. Standard stock orders ship within 3-7 working days; OEM customized orders typically take 15-25 days lead time. Contact our sales team for exact quotation and MOQ.
Contact Us & Send Inquiry