ENH-FNB41 9.6V 1100mAh Ni-MH Two-way Radio Battery FNB-41 for Vertex Standard VX-10V VX-10U Walkie Talkie | Enpower
ENH-FNB41 9.6V 1100mAh Ni-MH Rechargeable Battery for Vertex Standard VX-10V / VX-10U Two-way Radio
Enpower ENH-FNB41 high-performance nickel-metal hydride rechargeable battery engineered as a faithful OEM-spec replacement power supply for Vertex Standard OEM battery FNB-41. Purpose-built for the VX-10V / VX-10U compact handheld radios, this pack runs on a higher 9.6V nominal platform (8-cell configuration) that delivers stronger transmit power headroom and crisp audio output for demanding field communication in construction, security, warehousing, manufacturing, logistics, property management and event operations. Built around premium high quality long-cycle Ni-MH cells with stable 9.6V nominal voltage and a full 1100mAh capacity, a high impact ABS/PC composite shell and brass golden plated low-resistance contacts. The 9.91*5.66*2.56cm form factor faithfully follows the original battery dimensions, preserving the radio's balance and on-person carry comfort. Ni-MH chemistry is cadmium-free and memory-free, supports frequent opportunity charging without capacity loss, and tolerates deep discharge — an environmentally responsible workhorse for daily fleet rotation. Integrated protection covers short-circuit, over-temperature, charging temperature sensing and reverse polarity, and the pack works with your existing Ni-MH chargers (negative delta-V logic) with zero new charging infrastructure. Manufactured in Guangdong China with 12-month full quality warranty.
Basic Product Information
Applicable Equipment
Two-way Radio / Walkie Talkie
Matching OEM Models
FNB-41
Battery Type
Ni-MH (Nickel-Metal Hydride)
Overall Size (H*W*D)
9.91*5.66*2.56 cm
Shell Material
High Impact ABS/PC
Contact Material
Brass Golden Plated
Cell Quality
High Quality Long Cycle Ni-MH Cells
Protective Function
Short-Circuit Protection + Over-Temperature Protection + Charging Temperature Sensor + Reverse Polarity Protection
Application
Consumer Electronics / Two-way Radio
Quality Control
100% Aging Testing
Place of Origin
Guangdong, China
Warranty Period
12 Months
Compatible Radio Models
The ENH-FNB41 replacement battery is fully compatible with the following Vertex Standard two-way radio models:
VX-10V
VX-10U
Product Description & Core Advantages
✅ 9.6V High-Platform Power for VX-10V / VX-10U
Direct replacement for Vertex Standard OEM battery FNB-41, purpose-built for the VX-10V (VHF) and VX-10U (UHF) compact handhelds. The 9.6V eight-cell platform gives these radios stronger transmit headroom and crisper audio than the common 7.2V packs — while the 9.91*5.66*2.56cm housing faithfully follows the original battery dimensions for a plug-and-play fit, no modification required. Keep your VX-10 fleet running on one single battery standard for unified procurement and management.
✅ 1100mAh Ni-MH for Reliable Daily Duty
Premium high quality long-cycle Ni-MH cells deliver stable 9.6V output and a dependable 1100mAh capacity — enough for 6-8 hours of operation under standard duty cycles. Ni-MH chemistry is cadmium-free and memory-free, supports frequent opportunity charging without capacity loss, and tolerates deep discharge — an economical, environmentally responsible workhorse for daily shifts and spare-battery rotation programs.
✅ Full Protection Suite & Zero Charger Investment
Integrated protection covers short-circuit, over-temperature, charging temperature sensing and reverse polarity — complete safety for daily operations. Robust high-impact ABS/PC composite housing and brass golden plated low-resistance contacts — anti-drop, dustproof and moisture resistant for harsh jobsite conditions. Works with your existing Vertex Standard Ni-MH chargers (negative delta-V logic) — no new charging infrastructure required.
- ⭐ OEM FNB-41 Replacement — Faithfully matches original dimensions (9.91*5.66*2.56cm), drop-in fit for VX-10V / VX-10U without modification
- ⭐ 9.6V Eight-Cell Platform — Higher nominal voltage delivers strong transmit power headroom and crisp audio output for demanding field communication
- ⭐ 1100mAh Daily Duty Runtime — 6-8 hours of operation under standard duty cycles, sized for daily shifts and spare-battery rotation
- ⭐ Cadmium-Free & Memory-Free Ni-MH — No memory effect, recharge at any state of charge, environmentally responsible chemistry for fleet-wide deployment
- ⭐ Industrial Craftsmanship & Warranty — Brass golden plated contacts, 100% aging tested before shipment, OEM private label available, 12-month full quality warranty
Related Two-way Radio Batteries
Safety Cautions
⚠ Do not disassemble, puncture, crush or modify the battery housing — internal cell damage may cause electrolyte leakage, overheating or fire. Stop using the battery immediately if you notice unusual heat, odor or deformation, and move it to a safe non-flammable area away from combustibles.
⚠ Keep battery terminals away from metal objects such as coins, keys and jewelry to prevent accidental short-circuit. Do not expose the battery to high temperature above 60 degrees C, direct sunlight or open flame for extended periods.
⚠ Only charge with a Ni-MH compatible charger using negative delta-V charging logic — including your existing Vertex Standard charger for FNB-41-type packs. Do NOT use a Li-ion CC/CV charger on this Ni-MH battery — the charging logic is completely different and may cause over-charge, overheating or permanent damage.
⚠ For long-term storage, keep the pack fully charged in a cool dry place and recharge it every 2-3 months to prevent deep self-discharge. Dispose of spent packs at an authorized battery recycling collection point in compliance with local regulations — do not put them in household waste.
Frequently Asked Questions
Q1: Is ENH-FNB41 fully compatible with OEM FNB-41 and my VX-10V / VX-10U radios?-
A: Yes. ENH-FNB41 is a faithful OEM replacement for Vertex Standard FNB-41, with identical 9.91*5.66*2.56cm housing dimensions and a plug-and-play fit for the VX-10V (VHF) and VX-10U (UHF) handhelds. No modification required, and your existing Ni-MH charger keeps working.
Q2: Why does this battery use 9.6V instead of the 7.2V used by most Vertex packs? Can I use a 7.2V pack on my VX-10?+
A: The VX-10V / VX-10U was designed around an eight-cell 9.6V platform (OEM FNB-41) that gives the radio extra transmit power headroom and crisper audio — that is why this pack is 9.6V. The 7.2V packs used by the broad Vertex family (FNB-V57 / FNB-V83 / FNB-V67) serve a different radio generation with different housing dimensions, contact arrangement and voltage requirements — they are NOT interchangeable with the VX-10. Always replace with the same OEM platform: use ENH-FNB41 (9.6V) for VX-10V / VX-10U radios.
Q3: Can I use a Li-ion CC/CV charger or a generic charger on this Ni-MH battery?+
A: No. Ni-MH cells require a negative delta-V (or timer-based) charging logic, while Li-ion chargers use CC/CV (constant current / constant voltage) cutoff — the two logics are completely different. Charging this Ni-MH pack on a Li-ion charger may cause over-charge, overheating or permanent damage. Use only a Ni-MH compatible charger such as your existing Vertex Standard charger for FNB-41-type packs.
Q4: Will ENH-FNB41 also fit VX-5R, VX-820, VX-350, VX-450, EVX-530, Motorola, ICOM or other radio models?+
A: No. ENH-FNB41 (replacement for OEM FNB-41) is designed ONLY for the Vertex Standard VX-10V / VX-10U listed above. Other Vertex Standard radios use different battery families: the VX-110 through VX-246 / VX-400-428 broad family uses FNB-V57 (Ni-CD), FNB-V83 (Ni-MH) or FNB-V67 (Li-ion), the VX-5R / VX-6R / VX-7R series uses FNB-V80LI, the VX-820 / VX-821 / VX-920 / VX-921 series uses FNB-V87LI, the VX-350 / VX-351 / VX-354 series uses FNB-V95LI, the VX-230 / VX-231 / VX-228 series uses FNB-V104LI (Li-ion) or FNB-V106 (Ni-MH), the VX-450 / VX-451 / VX-454 / VX-459 series uses FNB-V113LI, the EVX-530 DMR series uses FNB-V134LI, and the VX-260 series uses FNB-V131 — housing dimensions, voltage platform, contact arrangement and locking mechanism are NOT interchangeable across these families. The same applies across brands: Motorola radios use their own NTN/NNTN/PMNN/HNN families, ICOM radios use the BP- series, KENWOOD radios use the KNB- series, and Hytera radios use the BH/BL series — Vertex/Yaesu packs do not fit Motorola, ICOM, KENWOOD or Hytera radios and vice versa. Always check the OEM battery part number printed on your existing battery before ordering.
Q5: Do you support OEM custom labeling or bulk quantity orders?+
A: Yes, we accept OEM and ODM orders. Custom shell printing, private label, capacity variants and connector customization are all available for bulk quantity. Standard stock orders ship within 3-7 working days; OEM customized orders typically take 15-25 days lead time. Contact our sales team for exact quotation and MOQ.
Contact Us & Send Inquiry