ENL-MOT4454 7.4V 2450mAh Li-ion Two-way Radio Battery PMNN4454 for Motorola MOTOTRBO DP4400 DP4600 DP4800 XPR3300 XPR3500 XPR7350 XPR7550 | Enpower
ENL-MOT4454 7.4V 2450mAh Li-ion Rechargeable Battery for Motorola MOTOTRBO DP4400 / DP4600 / DP4800 / XPR3300 / XPR3500 / XPR7350 / XPR7550 Two-way Radio
Enpower ENL-MOT4454 high-performance lithium-ion rechargeable battery engineered as a faithful OEM-spec replacement power supply for Motorola OEM battery PMNN4454. Purpose-built for the MOTOTRBO DP4400 / DP4600 / DP4800 digital portables and the XPR3300 / XPR3500 / XPR7350 / XPR7550 professional radios, this slim 1.75cm pack delivers full-shift digital communication for public safety, manufacturing, oil and gas, utilities, transportation, warehousing and event security operations. Built around premium high quality long-cycle Li-ion cells with stable 7.4V nominal voltage and a full 2450mAh capacity, a high impact ABS/PC composite shell and brass nickel plated low-resistance contacts. The 11.40*5.52*1.75cm form factor faithfully follows the original battery dimensions, preserving the radio's balance and on-person carry comfort even during 12-hour shifts. Li-ion chemistry is memory-free and cadmium-free, supports frequent opportunity charging without capacity loss, and its high energy density keeps the pack light on the belt. A 5-layer integrated protection circuit covers over-current, over-charge, over-discharge, temperature sensing and reverse polarity, and the pack works with your existing Li-ion chargers (CC/CV 8.4V logic) with zero new charging infrastructure. Manufactured in Guangdong China with 12-month full quality warranty.
Basic Product Information
Applicable Equipment
Two-way Radio / Walkie Talkie
Matching OEM Models
PMNN4454
Battery Type
Li-ion (Lithium-Ion)
Overall Size (H*W*D)
11.40*5.52*1.75 cm
Shell Material
High Impact ABS/PC
Contact Material
Brass Nickel Plated
Cell Quality
High Quality Long Cycle Li-ion Cells
Protective Function
Over-Current Protection + Over-Charge Protection + Over-Discharge Protection + Temperature Sensor + Reverse Polarity Protection
Application
Consumer Electronics / Two-way Radio
Quality Control
100% Aging Testing
Place of Origin
Guangdong, China
Warranty Period
12 Months
Compatible Radio Models
The ENL-MOT4454 replacement battery is fully compatible with the following Motorola MOTOTRBO two-way radio models:
DP4400
DP4600
DP4800
XPR3300
XPR3500
XPR7350
XPR7550
Product Description & Core Advantages
✅ 2450mAh Li-ion for the DP4000 / XPR7000 Fleet
Direct replacement for Motorola OEM battery PMNN4454, purpose-built for the DP4400 / DP4600 / DP4800 digital portables (international DP4000 series) and the XPR7350 / XPR7550 professional radios (US XPR7000 series), plus the compact XPR3300 / XPR3500. The slim 11.40*5.52*1.75cm housing faithfully follows the original battery dimensions for a plug-and-play fit, no modification required — one battery standard for your mixed DP4000 / XPR7000 / XPR3000 fleet means unified procurement and simplified rotation.
✅ Full-Shift Runtime in a Slim 1.75cm Body
Premium high quality long-cycle Li-ion cells deliver stable 7.4V output and a full 2450mAh capacity — enough for 12-14 hours of operation under a standard 5-5-90 duty cycle, covering the longest shifts without a mid-day battery swap. At only 113g with high energy density Li-ion chemistry, the pack keeps the radio light and balanced on the belt all day. Li-ion is memory-free and cadmium-free — recharge at any state of charge with zero capacity penalty.
✅ 5-Layer Protection & Zero Charger Investment
Integrated protection circuit covers over-current, over-charge, over-discharge, temperature sensing and reverse polarity — complete safety for daily operations. Robust high-impact ABS/PC composite housing and brass nickel plated low-resistance contacts — anti-drop, dustproof and moisture resistant for harsh jobsite conditions. Works with your existing Motorola Li-ion chargers (CC/CV 8.4V logic) — no new charging infrastructure required.
- ⭐ OEM PMNN4454 Replacement — Faithfully matches original dimensions (11.40*5.52*1.75cm), drop-in fit for DP4400 / DP4600 / DP4800 / XPR3300 / XPR3500 / XPR7350 / XPR7550 without modification
- ⭐ 2450mAh Full-Shift Runtime — 12-14 hours under standard duty cycles, sized for the longest public-safety and industrial shifts
- ⭐ Slim 1.75cm / 113g Carry Comfort — High energy density Li-ion keeps the radio light and balanced during all-day wear
- ⭐ 5-Layer Protection Circuit — Over-current, over-charge, over-discharge, temperature sensing and reverse polarity protection for mission-critical reliability
- ⭐ Industrial Craftsmanship & Warranty — Brass nickel plated contacts, 100% aging tested before shipment, OEM private label available, 12-month full quality warranty
Related Two-way Radio Batteries
Safety Cautions
⚠ Do not disassemble, puncture, crush or modify the battery housing — internal cell damage may cause electrolyte leakage, overheating or fire. Stop using the battery immediately if you notice unusual heat, odor, swelling or deformation, and move it to a safe non-flammable area away from combustibles.
⚠ Keep battery terminals away from metal objects such as coins, keys and jewelry to prevent accidental short-circuit. Do not expose the battery to high temperature above 60 degrees C, direct sunlight or open flame for extended periods.
⚠ Only charge with a Li-ion compatible charger using CC/CV (constant current / constant voltage) 8.4V charging logic — including your existing Motorola charger for PMNN4454-type packs. Do NOT use a Ni-CD or Ni-MH charger on this Li-ion battery — the charging logic is completely different and may cause over-charge, overheating or permanent damage.
⚠ For long-term storage, keep the pack at approximately half charge in a cool dry place and check it every 2-3 months. Dispose of spent packs at an authorized battery recycling collection point in compliance with local regulations — do not put them in household waste.
Frequently Asked Questions
Q1: Is ENL-MOT4454 fully compatible with OEM PMNN4454 and my DP4400 / DP4600 / DP4800 / XPR3300 / XPR3500 / XPR7350 / XPR7550 radios?-
A: Yes. ENL-MOT4454 is a faithful OEM replacement for Motorola PMNN4454, with identical 11.40*5.52*1.75cm housing dimensions and a plug-and-play fit for the DP4400 / DP4600 / DP4800 (DP4000 series), XPR7350 / XPR7550 (XPR7000 series) and XPR3300 / XPR3500 (XPR3000 series). No modification required, and your existing Li-ion charger keeps working.
Q2: What is the difference between PMNN4454 and the PMNN4407 / PMNN4418 packs for XPR3300 / XPR3500?+
A: PMNN4454 (this pack) is the slim high-density Li-ion option: 2450mAh in a 1.75cm-thin, 113g body — the lightest full-shift configuration for the DP4400 / DP4600 / DP4800 / XPR7350 / XPR7550, and also a slim upgrade path for XPR3300 / XPR3500. PMNN4407 and PMNN4418 are the standard and high-capacity packs commonly used on the XPR3300 / XPR3500 / DP2000 / DP3400 lines, with a different (thicker) housing. All three share the same 7.4V Li-ion platform and CC/CV 8.4V chargers, but housing dimensions differ — always match the OEM part number printed on your existing battery when ordering.
Q3: Can I use a Ni-CD or Ni-MH charger on this Li-ion battery?+
A: No. Li-ion cells require CC/CV (constant current / constant voltage) charging logic with an 8.4V cutoff, while Ni-CD / Ni-MH chargers use negative delta-V detection — the two logics are completely different. Charging this Li-ion pack on a Ni-CD / Ni-MH charger may cause under-charge or dangerous over-charge. Use only a Li-ion compatible charger such as your existing Motorola charger for PMNN4454-type packs.
Q4: Will ENL-MOT4454 also fit XPR6550, DP3400, APX, GP328, Vertex, ICOM, KENWOOD or other radio models?+
A: No. ENL-MOT4454 (replacement for OEM PMNN4454) is designed ONLY for the Motorola DP4400 / DP4600 / DP4800 / XPR3300 / XPR3500 / XPR7350 / XPR7550 listed above. Other Motorola radios use different battery families: the XPR6550 / DP3400 / XiR P8268 generation uses PMNN4066 or PMNN4077, the XPR3300 / DP2000 line commonly uses PMNN4407 or PMNN4418, the APX2000 / APX4000 P25 portables use NNTN8129, the CP/EP/PR entry family uses NNTN4496 / NNTN4497 / NNTN4970, the CP185 / CP1300 / CP1600 series uses PMNN4081, the Mag One A8 / A6 / BPR40 uses PMNN4071, the GP2000 / AX value series uses PMNN4046, and the legacy GP300 / GP328 / HT1000 / XTS families use their own HNN and NTN packs — housing dimensions, voltage platform, contact arrangement and locking mechanism are NOT interchangeable across these families. The same applies across brands: Vertex/Yaesu radios use the FNB- series, ICOM radios use the BP- series, KENWOOD radios use the KNB- series, and Hytera radios use the BH/BL series — Motorola packs do not fit other brands and vice versa. Always check the OEM battery part number printed on your existing battery before ordering.
Q5: Do you support OEM custom labeling or bulk quantity orders?+
A: Yes, we accept OEM and ODM orders. Custom shell printing, private label, capacity variants and connector customization are all available for bulk quantity. Standard stock orders ship within 3-7 working days; OEM customized orders typically take 15-25 days lead time. Contact our sales team for exact quotation and MOQ.
Contact Us & Send Inquiry