ENL-BO411 12V 1.5Ah / 2.0Ah / 2.5Ah 18-30Wh Li-ion Power Tool Replacement Battery BAT411 for Bosch GSR 10.8-2-LI / GDR 10.8-LI / GWI 10.8V-LI / GOP 10.8V-LI / GLI 10.8V-LI / PS40-2 / PS20-2 / PS10-2 Cordless Tools

The ENL-BO411 replacement battery is fully compatible with the following Bosch compact 10.8V (12V max) Li-ion cordless tools:

✅ Three Capacity Grades, One Compact 10.8V / 12V Platform
Direct replacement for the Bosch BAT411 OEM battery, offered in 1.5Ah (18Wh), 2.0Ah (24Wh) and 2.5Ah (30Wh). All three grades share the same compact housing and latch geometry and cover the Bosch compact cordless family - GSR 10.8-2-LI, GDR 10.8-LI, GWI 10.8V-LI, GOP 10.8V-LI, GLI 10.8V-LI and the PS40-2 / PS20-2 / PS10-2 pocket drivers - so your team can mix and match packs and chargers across the fleet without sorting by capacity.

✅ Featherweight 180g Li-ion Power with Full BMS Protection
At just 180g, the pack keeps compact tools perfectly balanced for overhead work and precision driving. Premium high quality long-cycle Li-ion cells deliver fade-free output under repeated drilling and driving loads, with no memory effect and no self-discharge worries between jobs - top up whenever convenient. A built-in BMS (Battery Management System) guards every pack against over-charge, over-discharge, over-current, short circuit and overheating, protecting both the battery and your tools.

✅ Faithful OEM-Spec Fit, Classic Black Housing
The 12.5*9.0*6.0 cm black housing faithfully follows the original BAT411 dimensions and latch geometry for a true plug-and-play fit - slide the pack onto the tool base, hear the latch engage, and the tool is ready to work. The high impact ABS+PC composite shell is anti-drop, dustproof and moisture resistant, and every pack passes 100% aging testing before shipment with a 12-month full quality warranty.

• ⭐ Bosch BAT411 Replacement - Direct drop-in fit for GSR 10.8-2-LI / GDR 10.8-LI / GWI 10.8V-LI / GOP 10.8V-LI / GLI 10.8V-LI / PS40-2 / PS20-2 / PS10-2 without modification
• ⭐ 1.5Ah / 2.0Ah / 2.5Ah Three Capacity Choice - From budget rotation stock to longest run time, all on one compact housing
• ⭐ Built-in BMS Five-Fold Protection - Over-charge, over-discharge, over-current, short circuit and over-temperature protection in every pack
• ⭐ No Memory Effect, No Self-Discharge Worries - Charge anytime without capacity penalty; packs hold their charge in storage between jobs
• ⭐ Rugged Jobsite Housing & Warranty - Black high impact ABS+PC shell, 100% aging tested before shipment, OEM private label available, 12-month full quality warranty

• ⚠ Stop using the pack immediately if you notice swelling, unusual heat or a burning smell, and contact the seller for support. Do not disassemble, puncture, crush or modify the battery housing - internal cell damage may cause electrolyte leakage, overheating or fire.

• ⚠ Keep battery terminals away from metal objects such as screws, nails, coins and keys to prevent accidental short-circuit - a particular risk in tool boxes and on jobsites. Do not expose the battery to high temperature, direct sunlight or open flame for extended periods, and never leave it inside a hot vehicle.

• ⚠ Only charge with a Bosch 10.8V / 12V Li-ion compatible CC/CV charger designed for the BAT411 battery family. Do NOT use a Ni-CD or Ni-MH charger on this Li-ion battery - the charging logic is completely different and may cause under-charge, overheating, permanent damage or safety hazards.

• ⚠ Let the pack cool down after heavy use before recharging, and charge in a dry area at room temperature. For long-term storage, keep the pack at roughly half charge in a cool dry place and top it up every few months. Dispose of spent packs at an authorized battery recycling collection point in compliance with local regulations - do not put them in household waste.