📞 Tel:+86-750-3857665

Email:sales@enpowertec.com

ENL-V6 vacuum cleaner battery manufacturer

enpower P/N:ENL-V6

oem battery:V6,DC62

Part Number:

Manufacturer (OEM):

oem model:

chemistry:Li-ion

voltge:21.6V

capacity:2AH 43.2WH / 2.2AH 47.52WH / 2.6AH 56.16WH / 3AH 64.8WH

Voltage/Capacity:

Demension (H*W*D)(cm):12.8*7.55*0.91

compatible radio:

Description: Replacement Battery V6 DC62 for Dyson DC58 DC59 DC61 DC62 Animal Vacuum Cleaner Battery

compatible models:Dyson DC58, DC59, DC61, DC62 Animal

PRODUCT INFORMATION

ENL-V6 21.6V 2.0Ah/2.2Ah/2.6Ah/3.0Ah 43.2-64.8Wh Li-ion Replacement Battery V6 DC62 for Dyson DC58 DC59 DC61 DC62 Animal Vacuum Cleaners | Enpower

ENL-V6 21.6V 2.0Ah / 2.2Ah / 2.6Ah / 3.0Ah 43.2-64.8Wh Li-ion Replacement Battery V6 DC62 for Dyson DC58 / DC59 / DC61 / DC62 Animal Cordless Vacuum Cleaners

Enpower ENL-V6 is a high-rate Li-ion rechargeable battery engineered as a faithful OEM-spec replacement for the Dyson V6 battery (OEM part number V6 DC62) used across the Dyson V6-generation cordless vacuum line - the DC58 and DC61 handheld models plus the DC59 and DC62 Animal stick vacuums. With a 21.6V nominal voltage and four capacity grades - 2.0Ah (43.2Wh), 2.2Ah (47.52Wh), 2.6Ah (56.16Wh) and 3.0Ah (64.8Wh) - the pack delivers the sustained high-current output that Dyson's digital motors demand, keeping suction strong and consistent from the first second of cleaning to the last, with no fading under load. Built around premium high quality long-cycle Li-ion cells, the pack carries no memory effect - top it up anytime between rooms or after quick cleanups without capacity loss - and a built-in BMS protection circuit guards against over-charge, over-discharge, over-current, short-circuit and over-temperature conditions for safe everyday household use. The 12.8*7.55*9.1 cm grey housing faithfully follows the original V6 battery dimensions and clip geometry for a plug-and-play fit with no modification, while the high impact ABS+PC composite shell withstands daily bumps and drops around the home. Manufactured in Guangdong China with 100% aging testing before shipment and a 12-month full quality warranty, the ENL-V6 brings your Dyson DC-series vacuum back to full run time at a fraction of the cost of a brand-new machine.

Basic Product Information

Brand
Enpower
Model No.
ENL-V6
Applicable Equipment
Cordless Vacuum Cleaner (Dyson DC58 / DC59 / DC61 / DC62)
Matching OEM Models
V6 DC62
Battery Type
Li-ion (Lithium-ion)
Nominal Voltage
21.6V
Nominal Capacity
2.0Ah (43.2Wh) / 2.2Ah (47.52Wh) / 2.6Ah (56.16Wh) / 3.0Ah (64.8Wh)
Overall Size (H*W*D)
12.8*7.55*9.1 cm (128*75.5*91 mm)
Weight
390g
Color
Grey
Shell Material
High Impact ABS+PC
Cell Quality
High Quality Long Cycle Li-ion Cells
Protective Function
Built-in BMS: Over-Charge / Over-Discharge / Over-Current / Short-Circuit / Over-Temperature Protection
Application
Power Tools / Home Appliances / Consumer Electronics
Quality Control
100% Aging Testing
Place of Origin
Guangdong, China
OEM / ODM
Available
Warranty Period
12 Months

Compatible Models

The ENL-V6 replacement battery is fully compatible with the following Dyson V6-generation cordless vacuum cleaner models:

Dyson DC58 Dyson DC59 Dyson DC61 Dyson DC62 Animal

Product Description & Core Advantages

✅ Four Capacity Grades, One Battery for the Dyson DC-Series Line
Direct replacement for the Dyson V6 DC62 OEM battery, offered in 2.0Ah (43.2Wh), 2.2Ah (47.52Wh), 2.6Ah (56.16Wh) and 3.0Ah (64.8Wh) and purpose-built to cover the V6-generation cordless family in a single SKU - the DC58 and DC61 handhelds plus the DC59 and DC62 Animal stick vacuums. All four grades share the same housing and clip geometry, so you can pick the budget-friendly rotation grade or the longest-running 3.0Ah upgrade without worrying about fit.

✅ Built-in BMS, 5-Layer Protection for Household Safety
A built-in BMS protection circuit guards every pack against over-charge, over-discharge, over-current, short-circuit and over-temperature conditions - essential safeguards for a battery that lives inside a household appliance and charges on the wall dock between cleanups. Premium high quality long-cycle Li-ion cells hold hundreds of charge cycles, and Li-ion chemistry has no memory effect: top up anytime after quick cleanups without capacity loss.

✅ Faithful OEM-Spec Fit, Durable Grey Housing
The 12.8*7.55*9.1 cm grey housing faithfully follows the original V6 battery dimensions and clip geometry for a true plug-and-play fit - click the pack into the vacuum handle or the charging dock and the vacuum is ready to run, no tools or modification required. The high impact ABS+PC composite shell is anti-drop and wear resistant for daily household use, and every pack passes 100% aging testing before shipment with a 12-month full quality warranty.

  • ⭐ Dyson V6 DC62 OEM Battery Replacement - Direct replacement for OEM battery V6 DC62, drop-in fit for the DC58 / DC59 / DC61 / DC62 Animal cordless vacuums without modification
  • ⭐ 2.0Ah / 2.2Ah / 2.6Ah / 3.0Ah Four Capacity Choice - From budget rotation stock to the longest 3.0Ah run time, all on one housing
  • ⭐ BMS 5-Layer Protection - Over-charge, over-discharge, over-current, short-circuit and over-temperature protection built in for safe everyday household use
  • ⭐ No Memory Effect - Li-ion chemistry lets you top up anytime between cleanups without capacity loss
  • ⭐ Durable Housing & Warranty - Grey high impact ABS+PC shell, 100% aging tested before shipment, OEM private label available, 12-month full quality warranty

Related Power Tool Batteries

Safety Cautions

  • ⚠ Do not disassemble, puncture, crush or modify the battery housing - internal cell damage may cause electrolyte leakage, overheating or fire. Stop using the battery immediately if you notice unusual heat, odor, swelling or deformation, and move it to a safe non-flammable area away from combustibles.

  • ⚠ Keep battery terminals away from metal objects such as coins, keys and paper clips to prevent accidental short-circuit - a particular risk in drawers and storage boxes. Do not expose the battery to high temperature, direct sunlight or open flame for extended periods, and never leave it inside a hot vehicle.

  • ⚠ Only charge with the original Dyson V6 Li-ion compatible charger or charging dock (CC/CV charging logic) designed for the V6 DC62 battery. Do NOT use Ni-CD or Ni-MH chargers on this Li-ion battery - the charging logic is completely different and may cause under-charge, overheating, permanent damage or safety hazards.

  • ⚠ Let the pack cool down after a full-home clean before recharging, and charge in a dry area at room temperature. For long-term storage, keep the pack at roughly half charge in a cool dry place and check it every 2-3 months. Do not store a fully depleted pack for extended periods. Dispose of spent packs at an authorized battery recycling collection point in compliance with local regulations - do not put them in household waste.

Frequently Asked Questions

Q1: Is ENL-V6 fully compatible with the Dyson DC58, DC59, DC61 and DC62 Animal?-
A: Yes. ENL-V6 is a faithful OEM-spec replacement for the Dyson V6 battery (OEM part number V6 DC62), with identical 21.6V nominal voltage and a grey housing that follows the original dimensions and clip geometry for a plug-and-play fit. It works across the V6-generation cordless vacuum line - the DC58 and DC61 handheld models and the DC59 and DC62 Animal stick vacuums listed in the compatibility table above. No modification required: click the pack into the vacuum handle or the charging dock and it is ready to run.
Q2: How do I choose between the 2.0Ah, 2.2Ah, 2.6Ah and 3.0Ah capacity grades?+
A: All four grades share the same 21.6V platform, housing and clip, so any of them powers every listed DC-series model - the difference is run time. 2.0Ah (43.2Wh) is the budget-friendly choice for high-turnover rotation stock; 2.2Ah (47.52Wh) and 2.6Ah (56.16Wh) are the balanced all-rounders for daily whole-home cleaning; 3.0Ah (64.8Wh) delivers 50% more run time than 2.0Ah for long sessions without swapping. Actual runtime also depends on the power mode you select - MAX mode drains any battery faster than standard mode. Because the pack uses Li-ion cells with no memory effect, you can top it up anytime after quick cleanups without capacity loss.
Q3: Can I charge ENL-V6 on an old Ni-CD or Ni-MH charger?+
A: No. This is a Li-ion pack and requires the original Dyson V6 Li-ion compatible charger or charging dock with CC/CV (constant current / constant voltage) charging logic designed for the V6 DC62 battery. Ni-CD and Ni-MH chargers use completely different negative delta-V charging logic - putting a Li-ion pack on one may cause under-charge, overheating, permanent damage or safety hazards. Always use the charger or dock that shipped with your Dyson vacuum, or a replacement explicitly rated for 21.6V Dyson V6 Li-ion packs.
Q4: Will ENL-V6 also fit Dyson V7 / V8 / V10 / V11 / V15 vacuums, other vacuum brands, or power tools?+
A: No. ENL-V6 (replacement for OEM battery V6 DC62) is designed ONLY for the Dyson V6-generation cordless vacuums listed in the compatibility table above. Other Dyson platforms are not interchangeable: the V7 / V8 line uses packs with different latch geometry and a physically larger housing, and the V10 / V11 / V15 lines run on higher-voltage packs with different cell counts, housings and clip designs - even where the nominal voltage looks close, the housings and contacts do not match. Vacuum brands other than Dyson use their own proprietary pack designs. The same applies across product categories: power tool batteries (Makita BL-, Bosch, DeWalt, Milwaukee and others) and two-way radio batteries (Motorola NTN / HNN / PMNN / NNTN, ICOM BP-, KENWOOD KNB-, Vertex FNB-, Hytera BH/BL series) have completely different housings, contacts and voltages and must never be used in vacuum cleaners. Always match the OEM battery part number and the voltage printed on your machine before ordering.
Q5: Do you support OEM custom labeling or bulk quantity orders?+
A: Yes, we accept OEM and ODM orders. Custom shell printing, private label, capacity variants and connector customization are all available for bulk quantity. Standard stock orders ship within 3-7 working days; OEM customized orders typically take 15-25 days lead time. Contact our sales team for exact quotation and MOQ.

Contact Us & Send Inquiry