ENH-MOT4412 7.2V 2200mAh Ni-MH Rechargeable Battery for Motorola XPR3000 / XPR7000 / DP4000 Series Two-way Radios

The ENH-MOT4412 replacement battery is fully compatible with the following Motorola MOTOTRBO two-way radio models:

✅ Faithful OEM Replacement for Motorola MOTOTRBO XPR / DP Series
Direct replacement for Motorola OEM battery PMNN4412, supporting the broad MOTOTRBO digital radio ecosystem: XPR3000/3300/3500 and XPR7000/7350/7550 in North America, the DP4000/4400/4401/4600/4800/4801/6401 professional series, XiR P8600-series hand-portables, DEP550/570 entry digital models and DGP8050/8550 — one battery SKU standardizing the power supply across compact, standard and smart-keypad fleets. Plug-and-play fit, no modification required.

✅ 2200mAh High-Capacity Ni-MH Cell Pack
Premium high quality long-cycle Ni-MH cells deliver stable 7.2V output and rated 2200mAh capacity — a high-capacity upgrade over many standard PMNN packs — for typical 11-13 hour operation under demanding DMR digital duty cycles (5-5-90). Ni-MH chemistry delivers excellent performance under high transmit load and cold-weather field conditions, with no toxic cadmium content.

✅ Rugged Housing & Practical Protection
Robust ABS/PC composite housing with ultrasonic integrated welding sealing, golden plated brass low-resistance contacts — anti-drop, dustproof and moisture resistant. Built-in short-circuit protection, charging temperature sensor and reverse polarity protection safeguard daily fleet operations. The 11.40*5.56*2.43cm form factor faithfully follows the original PMNN4412 battery dimensions for a balanced, secure fit on the radio chassis.

• ⭐ OEM PMNN4412 Replacement — Faithfully matches original dimensions (11.40*5.56*2.43cm), drop-in fit for 22 Motorola MOTOTRBO radio models without chassis modification
• ⭐ 2200mAh High Capacity, 7.2V Stable Output — Extended-shift operation on a single charge; Ni-MH chemistry tolerates high transmit current draw and cold environments
• ⭐ Cadmium-Free & Economical — Environmentally responsible Ni-MH chemistry with no toxic cadmium, ideal for large fleets seeking dependable power at controlled cost
• ⭐ Practical Triple Protection — Short-circuit protection, charging temperature sensor and reverse polarity protection built in; 100% aging tested before shipment
• ⭐ Industrial Craftsmanship & Warranty — Golden plated brass contacts, poly bag packing ready for retail or bulk distribution, OEM private label available, 12-month full quality warranty

• ⚠ Do not disassemble, puncture, crush or modify the battery housing — internal cell damage may cause electrolyte leakage, overheating or fire. Stop using the battery immediately if you notice swelling, unusual heat, odor or deformation, and move it to a safe non-flammable area away from combustibles.

• ⚠ Keep battery terminals away from metal objects such as coins, keys and jewelry to prevent accidental short-circuit. Do not expose the battery to high temperature above 60 degrees C, direct sunlight or open flame for extended periods.

• ⚠ Only charge with a Ni-MH compatible charger using negative delta-V or timer-based cutoff logic rated for 7.2V Ni-MH packs — including your existing Motorola PMNN-series Ni-MH charger. Do NOT use a Li-ion CC/CV 8.4V charger on this Ni-MH battery — the charging logic is completely different and may cause overheating or permanent damage.

• ⚠ Do not store the battery fully discharged for long periods. For long-term storage, keep the pack in a cool dry place and recharge every 3 months. This battery is cadmium-free Ni-MH chemistry and contains no toxic heavy-metal cadmium — please still return the spent battery to an authorized battery recycling collection point in compliance with local regulations.