ENL-MOT7335 7.4V 2600mAh Li-ion Rechargeable Battery for Motorola XTS1500 / XTS2500 / MT1500 / PR1500 Two-way Radios

The ENL-MOT7335 replacement battery is fully compatible with the following Motorola two-way radio models:

✅ Faithful OEM Replacement for Motorola XTS1500 / XTS2500 Series
Direct replacement for Motorola OEM battery NNTN7335, supporting the XTS1500, XTS2500 P25 portable platforms plus the MT1500 and PR1500 professional models. Plug-and-play fit, no modification required.

✅ 2600mAh High-Capacity Li-ion Cell Pack with 5-Protection BMS
Premium long-cycle Li-ion cells deliver stable 7.4V output and rated 2600mAh capacity — a high-capacity upgrade over many standard NNTN packs — for typical 12-14 hour operation under demanding P25 digital duty cycles (5-5-90). Built-in smart BMS module provides over current protection (OCP), over charge protection (OVP), over discharge protection (UVP), temperature sensor and reverse polarity protection — comprehensive safeguard against field failures in mission-critical deployments.

✅ Rugged Housing & Ultrasonic Welding Sealing
Robust ABS/PC composite housing with ultrasonic integrated welding sealing, golden plated brass low-resistance contacts — anti-drop, dustproof and moisture resistant. The 12.30*6.00*2.47cm form factor faithfully follows the original NNTN7335 battery dimensions for a balanced, secure fit on the radio chassis.

• ⭐ OEM NNTN7335 Replacement — Faithfully matches original dimensions (12.30*6.00*2.47cm), drop-in fit for XTS1500/XTS2500/MT1500/PR1500 radios without chassis modification
• ⭐ 2600mAh High Capacity, 7.4V Stable Output — Extended-shift operation on a single charge, low self-discharge, no memory effect thanks to Li-ion chemistry
• ⭐ Mission-Critical Reliability — Engineered for P25 public safety duty: stable voltage delivery under high transmit load, 100% aging tested before shipment
• ⭐ Wide Temperature Tolerance — Performs reliably across -20 degrees C to 60 degrees C working range, ideal for emergency response in harsh environments
• ⭐ Industrial Craftsmanship & Warranty — Manufactured under strict aging test procedure, OEM private label and bulk customization available, 12-month full quality warranty

• ⚠ Do not disassemble, puncture, crush or modify the battery housing — internal cell damage may cause electrolyte leakage, overheating or fire. Stop using the battery immediately if you notice swelling, unusual heat, odor or deformation, and move it to a safe non-flammable area away from combustibles.

• ⚠ Keep battery terminals away from metal objects such as coins, keys and jewelry to prevent accidental short-circuit. Do not expose the battery to high temperature above 60 degrees C, direct sunlight or open flame for extended periods.

• ⚠ Only charge with a Li-ion compatible CC/CV (constant current / constant voltage) charger rated for 8.4V charging voltage — including your existing Motorola XTS-series Li-ion charger or IMPRES charger. Do NOT use a Ni-CD / Ni-MH charger on this Li-ion battery — the cutoff logic is completely different and may cause overcharge, overheating or permanent damage.

• ⚠ Do not store the battery fully discharged for long periods. For long-term storage, keep the pack at approximately 40-60% charge in a cool dry place and recharge every 3 months. This Li-ion battery contains regulated lithium cells — do not dispose of it with household waste; return the spent battery to an authorized battery recycling collection point in compliance with local regulations.